“We typically switch off traction-control ... ‘speed shift’ manual transmissions. To date, only two manufacturers (select Chevrolet and Porsche vehicles) have a ‘no-lift-shift' protocol ...

The exact amount has yet to be measured but given that the original car was prone to lift, it’s definitely ... to be replaced by a six-speed Tremec manual transmission, driving the rear wheels ...

The suspension was also massaged, with traction bars, droop-limiting cables ... Combined with a steel crank, four-bolt mains, solid lifters, 780 cfm Holley, and a 10.5:1 compression ratio ...

Q4 2025 Earnings Conference Call April 16, 2025 9:30 AM ETCompany ParticipantsDipak Bohra - Senior Vice President, ...

518-inch-exhaust lift produced the best numbers in Don's ... Don uses a B&M Pro Stick competition shifter to change gears on the full manual valve body C4. The trans hooks to the engine via ...

Many unsuccessful attempts have been made to design a practical automatic track for use on traction enginps ... It is connected by a rod or pitman to a crank keyed on each end of the steerage ...

The laces should hold the boot in an “intermediate position”—that is, that you still have room to crank them tighter ... hold the boot heel down and try to lift your heel inside the boot. There should ...

You get three pedals, a six-speed manual gearbox, analogue dials ... Instead, you must brake early, let the nose settle, then turn in with a gentle lift, using the rearward weight bias to bring the ...