Installation Instructions for 1210 Parachute Release Cable Kit. Installation Instructions: Determine the location to mount the handle. Note: The handle must be easily reached when driver is …

posted April 10, 2005 03:40 PM i need a cheap torque converter and i saw one in jegs for about 200. are they any good or a waste of money?

Installation Instructions for 11200 Oil Pressure Safety Switch BE CAREFUL – DO NOT OVERTIGHTEN THE THREADED FITTINGS! Use a Teflon thread sealing compound to avoid …

The electric fuel pump in this instruction sheet is of the vane rotor type. JEGS makes three versions: a low-pressure pump meets the flow requirements of most passenger vehicles. The …

Remove stock timing cover. Rotate engine to top dead center of cylinder #1 so that the timing marks on the original crank and cam sprockets are directly lined up with each other, i.e. the …

10405: Installation Instructions for Universal 20-Circuit Wiring Harness. Contents: Wiring Harness w/ Fuse Panel, Installation Instructions, Turn Signal Plug w/ Terminals, 2 – Headlight Plugs, …

The JEGS universal wiring harness is designed for use in most cars or trucks that have the engine mounted in the front of the vehicle and can mount the fuse block under the dash.

First determine the location of the front chassis bracket. Make a template of the bracket by tracing it onto cardboard. Trim the template to fit under the chassis tube. When you are satisfied with …

Installation Instructions for 10200 Universal Engine/Body Ground Strap Kit. Includes: (1) Braided Copper Ground Strap: 1/0 gauge x 14” long (for the engine ground), (3) Braided Copper …

The JEGS “Just-Able” mounting system is extremely easy to use. 1. Simply drill two 1/4” holes with clearance. Use a letter “F” drill bit (.2570”) or 17/64 drill bit (.2656”) in your selected …